Smoker baking igniter do you know how it is?

 Do you know what the smoke machine baking igniter is like?

Smoke machine baking igniter is something that can be seen everywhere in our daily life, so don't you know the function of igniter? Today, I collected information on the function of the cigarette lighter baking igniter on the Internet. So, let's learn about the little knowledge of the cigarette lighter baking igniter.

Smoke machine baking igniter refers to a device that instantly provides enough energy to ignite coal powder and oil (gas) fuel to stabilize the flame. There are commercial stoves and civilian stoves for hood baking igniters. Commercial ignition systems primarily for use in catering stoves. Due to the complex environment of catering kitchens, the selection requirements for baking lighters are stricter than those for civilian use. It is mainly used in the ignition device system of civilian household stoves. Compared with catering stoves, the use environment is simpler, and more pulse ignition is selected.

The types are roughly divided into the following three types.

Electronic pulse igniter: The output power of the pulse igniter is low, the ignition energy is low, and the spark temperature is low. For some high-ignition, optional gas, and low-concentration mixed gas, the burner with air supply has a low ignition rate, and safety accidents such as explosion failure and deflagration often occur for a long time.

Electronic high-voltage igniter: high power, high ignition energy, high spark temperature, but the ignition time generally does not exceed 5 minutes. Otherwise, it is easy to generate heat, burn, bulky, and difficult to install and transport.

Silicon igniter: high power, high energy, high spark temperature, ignition time is about 10 minutes. Otherwise, it will be very hot, small in size and light in weight, but domestic products are generally of poor quality, and 90% of the market is occupied by imports.

The role of the smoke machine baking igniter is to cooperate with the sensor to determine the ignition moment of the spark plug, that is, the ignition moment. A damaged igniter is basically useless, but the interior is actually very simple, just a few diodes, resistors, and thyristors. This is not a transformer. The ignition coil generates high voltage. The ignition coil is a transformer. The igniter only controls when the high voltage is generated.

The working principle of the hood baking igniter is to convert the AC power frequency 220v into a DC pulsating current through step-up rectification to charge the energy storage capacitor. After the capacitor is fully charged, the discharge current is transmitted to the ignition match semiconductor chip through the discharge tube, choke coil, shielded cable, etc. A high energy arc spark is formed. After the ignition is turned off, the remaining charge in the capacitor is discharged through the discharge resistor.

The above is a brief introduction to the hood baking igniter. Regarding the igniter for hood baking, it is recommended that you first understand the defects of the igniter. The carbon deposits that build up on the spark plugs will always ignite, are difficult to clean, and the electrostatic capacity of the system is not good. Then go through all the information about the function of the igniter, hoping to have more options when choosing an igniter in the future.