The principle of overcurrent protection of power capacitors for smoker baking igniter fitness exercise
No matter how many gas stoves there are, there must be an igniter, otherwise it will not work normally. It has two ignition methods, one is electronic pulse ignition, and the other is piezoelectric ceramic sheet ignition. Take you to master the knowledge related to hood baking igniters.
Hob roasting igniter
The principle of the overcurrent protection of the cigarette machine baking igniter fitness sports power capacitor is to discharge the zero line of the voltage live line and the ground line for a moment, causing a small flame to ignite the gas stove. This method is safe and convenient, and has excellent application.
But for safety, it is best to install a switch between the live wire and the neutral wire and the capacitor. In addition, connect the iron frame of the gas stove to the ground with a power line, and pay attention to ensure good contact.
Turn on the main switch of the power supply, then open the gate valve of the liquefied petroleum gas, hold the bamboo pen body and slide it twice on the fire spit of the stove, the spark discharge released will quickly ignite the liquefied petroleum gas. Turn off the power after use, and hang the bamboo pen body on the wall.
Which is the best igniter for hood roasting
The gas cooker has a single structure, and the natural gas introduced from the connecting hose can be ignited with an igniter. Which kind of igniter is better for the hood? You may wish to continue to look down:
1. Continuous single pulse igniter
The igniter is mainly used to transform and equip gas stoves that do not have a full-automatic ignition device. It can be easily installed on two-burner gas stoves that are already in operation or on the market. The installation and operation method is to install the igniter under the switch panel in front of the gas stove, stabilize it with screws, and then install the two discharge temper pins around the right burner, so that the tops of their heads point to a fire hole in the burner. , the spacing is 3-5mm.
2. Flashlight type single pulse igniter
The igniter is made of non-toxic plastic, hose guide, and spring. It has a high ignition success rate and a faster ignition speed. Generally, the burner can be ignited by pressing the button for 2-3 seconds, and it is of high quality and low price. Novelty and trustworthy. Generally, it does not need to be installed in the gas cooker, so it is convenient to use, and is suitable for ignition of the household gas cooker.
3. Piezoelectric ceramic indirect igniter
Its ignition method needs to first ignite the ignition tube with a slow fire with the spark discharge of the piezoelectric ceramic sheet, and then change the slow fire to ignite the key burner, so it is turned into an indirect igniter. Since the igniter completes the linkage between natural gas and the ignition power switch, it is convenient to use and reliable, which not only contributes to environmental protection and energy saving, but also reduces the user's operating procedures.
After inspection, it is because the inside of the shell is damp, and the discharge high-voltage cable in the shell has discharged in the wet place inside the shell before the high voltage is transmitted to the front of the igniter, so the stove cannot be ignited normally. For this matter, the cleaning machine and the tide should be carried out in the shell first; and the insulation layer between the wires can be improved, and the method of adding an insulating sleeve to the high-voltage wire (the insulating sleeve can be used for the waste ballpoint pen core tube) can be used. , this solution can effectively prevent common faults from recurring.