The production method of Chinese herbal medicine igniter

A manufacturing method of a Chinese medicinal material igniter

Discloses a traditional Chinese medicine stove hot pot, which includes a pot, a stove pan, a furnace cover, an igniter and pot ears. The tank is a magnetic stainless steel cylindrical structure with a flat top, and the bottom edge of the tank is spread out with a wide smooth tank. The suction is strong and painless. The top of the Chinese medicinal material igniter is connected to the stove tray, which integrates the utility model of water tank therapy, hyperthermia, and external Chinese medicine therapy. The structure is simple, the operation is convenient, the suction area is large, and the suction is strong. It can be widely used as a medical device. application.

Most of the existing tanks are glass tanks and air tanks. Glass jars smoke traditional jars. The disadvantages are: 1. It is easy to break. 2. Small inhalation area: The maximum inner diameter of the glass jar is 5 cm. When pumping jars from a large area such as the abdomen, etc., multiple jars are required, and the distance between the jars and jars should not be too close. Otherwise, the skin will be dragged by the cans causing pain, and at the same time, the cans cannot be squeezed against each other to hold tightly. Third, the suction is difficult to control in the glass jar itself. Only when the negative pressure occurs after the oxygen is ignited can it have the absorption capacity. Since the pressure in the tank is constant, when the suction force in the tank is small, the interstitial fluid is easy to permeate quickly and produce blisters, so skin infection may occur. In order to make up for the deficiencies of the above-mentioned technologies, the utility model provides ten cans of traditional Chinese medicine stoves with large absorption area, strong absorption capacity, canned food treatment, hot compress, and external application of traditional Chinese medicine

. The hot tank of the traditional Chinese medicine furnace of the utility model adopts a magnetic stainless steel material to the tank. In the utility model, the grate heating tank for traditional Chinese medicine, the tank mouth adopts other specifications with an inner diameter of 18 centimeters, 16 centimeters, 14 centimeters, 12 centimeters, 10 centimeters, and 8 centimeters. Due to the further improvement of the above scheme, the utility model of the traditional Chinese medicine furnace heating tank, the tank is a special-shaped tank structure, which can form a suitable special shape according to the suction position and area. Specific embodiments of the igniter for Chinese herbal medicines In the following, the igniter for Chinese herbal medicines of the utility model will be further described and described in conjunction with the examples.

The utility model Chinese medicine hearth, described tank 1 uses magnetic stainless steel material, stimulates the microcirculation system by the weak magnetic field of tank 1, promotes blood circulation, improves human body physiological magnetic field, has weaker effect to eliminate fatigue.

The utility model Chinese medicine grate heat tank, the tank I port adopts internal diameters of 18 centimeters, 16 centimeters, 14 centimeters, 12 centimeters, 10 centimeters, 8 centimeters of multiple specifications, expanding the scope of application of the tank.

Due to the further improvement of the above-mentioned scheme, the utility model Chinese medicine hearth, the tank 1 is a special-shaped tank structure, and a suitable special-shaped tank is formed according to the pumping position and the size of the area, such as a special-shaped tank suitable for the knee joint, and one tank can solve the problem . During use, smear traditional Chinese medicinal wine on the treatment site, place the igniter 4 on the treatment site, place a fuel ball with a specific capacity on the igniter 4, lock the water tank 1 on the igniter 4 after igniting, and generate negative energy after burning oxygen. After the skin and muscles are sucked into the vat, they are replaced on the stove plate 2 for a certain period of time to burn fuel balls with a specific capacity to adjust the proper vat steaming temperature.