High ignition efficiency of cigarette machine baking igniter


Release time:

2022-11-14

The torsion spring is destroyed, the torsion spring loses its elastic force, and the elastic force of the torsion spring weakens. This will make the power switch of the gas stove cannot return to its original place after it is turned on, which makes the igniter of the gas stove ignite all the time. This is also a common situation in gas stoves, and it is also a situation that is easy to overcome. In this case, just change the torsion spring of the igniter. For torsion springs, you can easily buy them as long as you go to the hardware store.

The gas stove has been igniting all the time. It is also possible that the high-voltage electronic device is broken. This is a more complex and unsolvable problem than the destruction of the front torsion spring. Simply put, the reason why the high-voltage electronic device is destroyed and the cigarette machine baking igniter has been ignited is that a complete circuit cannot be generated, causing the gas stove to be ignited all the time. This situation is generally not easy to solve, so it is recommended to find professional staff.

Pulse igniter supporting facilities for all kinds of fuel appliance spare parts, all kinds of gas stoves, European classical stoves, natural gas water heaters, natural gas wall-mounted stoves, gas ovens, gas grills, all kinds of industrial gas, gasoline and diesel industrial kilns, tunnel construction industrial kilns, cookie machinery and equipment, hotel restaurant earth stoves household energy saving appliances, etc. 30 years focus on a variety of high pressure package, ignition wholesale price. The company has advanced technology, good characteristics of machine processing equipment and household appliances production line equipment, with complete testing methods, rich design expertise, production and manufacturing work experience, a relatively well-known technical professional research institute and our company Start cooperation. The following small series mainly recommend the stove igniter.

The basic principle of gas stove pulse igniter:

Pulse igniters are common in modern cigarette machine baking igniters. Pulse igniters are a single pulse high-frequency oscillator composed of electronic components. The high-frequency working voltage formed by the oscillator is upgraded to a large current of 15KV through a step-down transformer to carry out electrostatic induction, and the natural gas in the gas stove is ignited by the flame releasing electric energy. This kind of pulse igniter ignition high efficiency, sustainable charge and discharge. Press the knob to gradually ignite the pulse igniter; release the knob to terminate the ignition of the pulse igniter.

gas stove high voltage electric arc igniter assembly:

1. The switching power supply for the ignition wire of the high-voltage electric arc igniter of the gas stove should be 200-240AC (positive level of the bottom line and negative level of one line). If the connection is reversed, only the positive and negative electrodes are consistent, and the cigarette machine baking igniter can operate normally. However, if the positive and negative electrodes are inconsistent, it is easy to burn the fuse and then burn the igniter directly. Therefore, the wiring must be careful and delicate.

2. The high-voltage electric arc igniter of the gas stove must properly wire all kinds of line color functions before it can be plugged in for application. When connecting the wires, be sure to connect the thin wires with the support frame of the gas stove itself. The high-voltage ignition wire and the induction wire cannot be tested on each other, otherwise the induction system will be invalid until it is damaged. Do not connect the high-voltage line and the induction line too long, which will affect the high-voltage ignition compressive strength and magnetic induction.