Do you know what is the cigarette machine baking igniter?


Release time:

2023-02-10

do you know what is the cigarette machine baking igniter?

The cigarette lighter is something that can be seen everywhere in our daily life, so don't you know the role of the lighter? Today, I collected information on the function of the cigarette lighter baking lighter on the Internet. So, let's learn about the little knowledge of the cigarette lighter baking lighter.

Hume machine baking igniter refers to a device that instantly provides enough energy to ignite pulverized coal and oil (gas) fuel to stabilize the flame. Smoke machine baking igniter has commercial furnace and civil furnace. It is mainly used in commercial ignition device systems for catering stoves. Due to the complex environment of catering kitchen, the choice of lighter for baking is more stringent than that for civilian use. It is mainly used for the ignition device system of civil household stoves. Compared with catering stoves, the use of the environment is simpler, more choice of pulse ignition.

The types are roughly divided into the following three types.

Electronic pulse igniter: pulse igniter has low output power, low ignition energy and low spark temperature. For some high-fire, optional gas, low-concentration mixed gas, the burner with air supply has a low ignition rate, and safety accidents such as explosion-proof and deflagration often occur for a long time.

Electronic high-voltage igniter: high power, high ignition energy, high spark temperature, but the ignition time generally does not exceed 5 minutes. Otherwise, it is easy to heat, burn, large in volume, and difficult to install and transport.

Silicon igniter: high power, high energy, high spark temperature, ignition time is about 10 minutes. Otherwise, it will be very hot, small in size and light in weight, but domestic products are generally of poor quality, and 90% of the market is occupied by imports.

The function of the cigarette machine baking igniter is to cooperate with the sensor to determine the ignition timing of the spark plug, that is, the ignition timing. The damaged igniter is basically useless, but the inside is actually very simple, just a few diodes, resistors, and thyristors. It's not a transformer. The ignition coil generates a high voltage. The ignition coil is a transformer. The igniter controls only the generation time of the high voltage.

The working principle of the cigarette machine baking igniter is to convert the AC power frequency 220v into DC pulsating current through boost rectification to charge the energy storage capacitor. After the capacitor is fully charged, the discharge current is transmitted to the ignition match semiconductor chip through the discharge tube, choke coil, shielded cable, etc. A high energy arc spark is formed. After the ignition device is stopped, the remaining charge in the capacitor is discharged through the discharge resistor.

The above is a brief introduction to the cigarette machine baking igniter. Regarding the cigarette machine baking igniter, it is recommended that you first understand the defects of the igniter. The carbon deposits accumulated on the spark plug will always ignite, which is difficult to clean, and the electrostatic capacity of the system is not easy to choose. Then through all the information about the function of the igniter, I hope that there will be more choices when choosing the igniter in the future.